localhost routing issue with new OpenVPN install
paul
paul at subsignal.org
Sat Jul 14 01:56:02 PDT 2007
Fabian Peters schrieb:
> Hi all,
>
> I'm facing a strange issue here, after having decommissioned an old
> OpenVPN setup and replaced it with a new one. The old one was at home
> in the 10.100.100.x range, the new one is in 10.10.10.x. My machine
> (running OS X 10.4.10) is placed in a small LAN using 10.0.0.x, with
> its primary IP being 10.0.0.6 and the router placed at 10.0.0.1.
>
> While OpenVPN is not running, everything's fine. "netstat -rn" shows:
>
> Destination Gateway Flags Refs Use Netif Expire
> default 10.0.0.1 UGSc 40 8 en0
> 10/24 link#4 UCS 3 0 en0
> 10.0.0.1 XX:XX:XX:XX:X:X UHLW 38 33 en0 1154
> 10.0.0.6 127.0.0.1 UHS 0 0 lo0
> 10.0.0.7 XX:XX:XX:XX:X:X UHLW 1 5001 en0 507
> 10.0.0.255 ff:ff:ff:ff:ff:ff UHLWb 0 3 en0
> 127 127.0.0.1 UCS 0 0 lo0
> 127.0.0.1 127.0.0.1 UH 10 5865 lo0
> 169.254 link#7 UC 0 0 fw0
>
> Internet6:
> Destination Gateway Flags Netif Expire
> ::1 link#1 UHL lo0
> fe80::%lo0/64 fe80::1%lo0 Uc lo0
> fe80::1%lo0 link#1 UHL lo0
> fe80::%en1/64 link#5 UC en1
> ff01::/32 ::1 U lo0
> ff02::/32 ::1 UC lo0
> ff02::/32 link#5 UC en1
>
> On connecting, OpenVPN issues the following commands:
>
> ifconfig tun0 10.10.10.10 127.0.0.1 mtu 1500 netmask 255.255.255.255 up
> route add -net 10.10.10.0 127.0.0.1 255.255.255.0
>
> Which look fine to me and do succeed. "netstat -rn" then shows:
Why is the gateway for your VPN route (presumably the VPN server)
127.0.0.1? I'm assuming you're the VPN client so the route command
should be something like:
route add -net 10.10.10.0 <IP of VPN server> 255.255.255.0
cheers
Paul
More information about the MacOSX-admin
mailing list